Name: VENTILATOR FRESH AIR W/ POWER DAMPER AND FILTER
Brand: Aprilaire

VENTILATOR FRESH AIR W/ POWER DAMPER AND FILTER

Part #8145NC

MFG #8145NC

120 VAC 60 Hz 1-Phase, 210 CFM at 0" SP, 180 CFM at 0.2" SP, 150 CFM at 0.4" SP, 120 CFM at 0.6" SP, Fresh Air Ventilator. This fresh air ventilator with power damper and filter improves indoor air quality by bringing the precise amount of outdoor air into tight homes. It optimizes energy savings by locking out ventilation during hottest/coldest times of the day.

Price:

Consumer Financing

Brand: Aprilaire

Specification Sheet

Installation

Manage the Quality of your Home’s Air Year-Round, with Little Effort
Provides an Optimal Amount of Fresh Air, Customized, for your Home, but Meets Required Building Codes
Minimizes the Introduction of Air That's too Hot, too Cold or too Humid. If Missed, Time Can be Made up when Outdoor Conditions are More Favorable
Energy-Efficient Way to Add Fresh Air in your Home will Not Ventilate If the Outdoor Air will Raise Indoor Relative Humidity Above 55%
5-Year Warranty and Requires Periodic Filter Cleaning/Replacement
Overall Dimensions: 121/4" W x 113/4" H x 232/5" L
Weight: 15 lbs
Inlet Collar: 6" Round
Outlet Collar: 6" Oval
Ventilation Setting: Off, 6-60 min/hr Code/Comfort Operation
Ambient Temperature: 0°F - 140°F
Outdoor Temperature Limits: Low: -10°F - 40°F, High: 85°F - 105°F
Indoor RH Limits Low: 10 - 30% High: 45 - 70%
Voltage: 115 VAC, 1 phase, 60 Hz Power Includes 6' power cord
Ducting: 6" dia. flexible insulated duct
Warranty: 5 Years
ETL: Tested to UL Standard 705 Not for outdoor use
This fresh air ventilator with power damper and filter improves indoor air quality by bringing the precise amount of outdoor air into tight homes. It optimizes energy savings by locking out ventilation during hottest/coldest times of the day. The Model 8145NC has no integrated control so the ventilator can be hardwired to the HVAC system and controlled from within the living space. Control provides the capability to adjust the high/low outdoor temperature limits and indoor RH limits. 6-foot power cord with a standard 5-15P plug is provided with unit. 24-volt wiring to HVAC system. Furnace or air handler does not require an EC motor to qualify to meet the ventilation efficiency requirements of Energy Star for homes, or 2012 - 2018 International Energy Code. Integrated powered damper and removable, washable MERV 6 filter. Replacement MERV 13 filter available. Installation temperature up to 140°F + Duct collars accept 6" duct + ETL listed When properly installed and set, it will meet the following mechanical ventilation requirements:** ASHRAE Standard 62.2 + Energy Star for Homes + EPA Indoor airPLUS + 2018/2015/2012 International Residential Code (IRC) + 2018/2015/2012 International Energy Conservation Code (IECC) + California Energy Commission Title 24
** 8145NC compliance is subject to the functionality of the external control. To assure compliance, use an 8910, 8910W, 8920W, 8620 or 8620W thermostat or 8120X ventilation controller. *** Measured across ventilator. † Pat. No. 9,874,366. Applies to all controls listed above.