Fieldpiece | JOB LINK SYSTEM PROBES CHARGE TEST KIT JL3KR4

JL3KR4 - JOB LINK SYSTEM PROBES CHARGE TEST KIT

A2L Ready

JOB LINK SYSTEM PROBES CHARGE TEST KIT

Part #JL3KR4

Directly connects to mobile device with Job Link System App. Fast accurate temps with new Rapid Rail technology. Pressures auto calibrate at any elevation. Great for critically charged systems

Connect two pressure probes and two pipe temperature clamps to immediately see system charge on your Job Link® System mobile app. Easily determine if unit is running properly, or if troubleshooting is needed. All measurements can be sent up to 1000’ away directly your mobile device. Each tool is designed for agility and speed. The pressure probe fits into tight spaces. The pipe clamp uses a new Rapid Rail™ sensor design to deliver accuracy, speed, and agility, even on the most awkward pipe configurations. Do more with Job Link probes!

Price:

Consumer Financing

Brand: Fieldpiece

A2L Refrigerant Compatible: Yes

Flyer

Powerful Wireless Signal Strength

Up to 1000’ wireless signal
Powerful enough to go through most walk-in coolers and freezers
Directly transmits to your mobile device

Rapid Rail™ Sensor Advantages

Stabilizes in under 5 seconds
Beeper and LED indicate accurate connection
The Rapid Rail™ sensor uses pipe to complete circuit so ambient conditions don’t affect the measurement
Narrow jaw connects in tight spaces and on irregular pipe shapes

Reliable Pressures Regardless of Location

45° angled fitting easily connects in tight spaces
Pressure sensors are accurate at any elevation
Calibrates automatically when powered on

Includes:

2 x JL3PC Job Link Premium Pipe Clamp Probes
2 x JL3PR Job Link Pressure Probes
ANC18 Protective Case
2 x AAA Batteries Per Probe (8 Total)

SPECIFICATIONS

Wireless Range: 1000 feet or more (305 meters)
Wireless Frequency: 2.4 GHz
Battery: 2x AAA (included)
Battery Life: 150 hours typical alkaline
Auto Power Off (APO): 2 hours (can be disabled)
Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0

Job Link Pressure Probe – JL3PR

Connector Type: 45° Standard 1/4” NPT female flare
Best Accuracy: ±1 psig (±7 kPa)
Measurement Range: 0 to 580 psig (0 to 4000 kPa)
Maximum Overload: 800 psig (5500 kPa)
Water Resistant: Designed to IP55

Job Link Premium Pipe Clamp Probe – JL3PC

Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
Accuracy: ±1°F (±0.6°C)
Measurement Range: -50°F to 257°F (-46°C to 125°C)
Stabilization Time: Three seconds typical
Measurement Feedback: Beeper and LED
Water Resistant: Designed to IP55
Patent: 10,365,165